Set Up a Virtual Private Network (VPN)
105
6. In the WAN IP field, enter the remote gateway’s WAN IP address.
7. In the Remote Site IP address and Subnet field, enter these settings from the remote gateway.
Note:
Each gateway must have a unique non-overlapping IP address range.
8. Click the
Save
button.
9. For the second gateway, repeat Steps 1–8 of this procedure.
Enable the Site-to-Site VPN
Enabling the VPN activates the VPN server feature on the gateway.
To enable the VPN:
1. On the first gateway, select
Settings
>
General
>
VPN
.
2. Select the VPN Status
Enable
radio button.
3. Click the
Apply
button. The VPN connection is activated.
4. On the second gateway, select
Settings
>
General
>
VPN
.
5. Select the VPN Status
Enable
radio button.
6. Click the
Apply
button. The VPN connection is activated.
The IPSec VPN tunnel is established between the two gateways. The LAN-side resources from one
gateway can access the other through this tunnel.
To disable the VPN:
1. On a computer or wireless device that is connected to your gateway, launch a Web browser.
2. In the address or URL field of your browser, type
http://myrouter
.
3. When prompted to log in, enter
admin
for the user name and type the password. (The default
password is
password
.)
4. Click
Settings
>
General
>
VPN
.
5. Select the VPN Status
Disable
radio button.
6. Click the
Apply
button.
The VPN connection is disabled, but your VPN settings are retained.
