NetApp HCI, Руководство пользователя

Страница: 74 / 363

Deploy NetApp HCI
Access the NetApp Deployment Engine
Access the NetApp Deployment Engine
To deploy NetApp HCI, you need to access the NetApp Deployment Engine on one of the
NetApp H-Series storage nodes via the IPv4 address assigned to the Bond1G interface,
which is the logical interface that combines ports A and B for storage nodes. This storage
node becomes the controlling storage node for the deployment process. Depending on
your environment, you need to either configure the IPv4 address or retrieve it from one of
the storage nodes.

You can only access the NetApp Deployment Engine using the Bond1G interface of a
storage node. Using the Bond10G interface, the logical interface that combines ports C and
D for storage nodes, is not supported.
Use one of the following methods that best describes your network environment to access the NetApp
Deployment Engine:
Scenario Method
You do not have DHCP in your environment Access the NetApp Deployment Engine in
environments without DHCP
You have DHCP in your environment Access the NetApp Deployment Engine in
environments with DHCP
You want to assign all IP addresses manually Manually assign IP addresses to access the NetApp
Deployment Engine
Find more information
• Configure Fully Qualified Domain Name web UI access
Access the NetApp Deployment Engine in environments without DHCP
When DHCP is not in use on the network, you need to set a static IPv4 address on the
Bond1G interface of one of the storage nodes (also known as a controlling storage node)
that you will use to access the NetApp Deployment Engine. The NetApp Deployment
Engine on the controlling storage node will discover and communicate with other
compute and storage nodes using IPv4 addresses that have been auto-configured on the
Bond10G interfaces of all nodes. You should use this method unless your network has
special requirements.
What you’ll need
• You or your network administrator have completed the tasks in the Installation and Setup Instructions
document.
• You have physical access to the NetApp HCI nodes.