Net2Phone Yap Jack Pro, Руководство пользователя

Страница: 16 / 110

Yap Jack Pro User’s Guide – Chapter 2
10
To set up and connect your device:
1. Connect the Yap Jack Pro into your telephone
jack.
•
Plug one end of the telephone cable (RJ-11)
into the
Line port on the back of the device.
•
Plug the other end into a working telephone
wall jack.
2. Connect your telephone into the Yap Jack Pro.
•
Plug the RJ-11 cable from your telephone
into the
Phone port on the back of the
device.
3. Connect the serial cable to a receipt printer and
power up the printer.
Make sure the printer has the following
settings:
o
9600 baud
o
8 bit
o
1 stop bit
o
No parity
If you are using a printer that is non-
configurable, please be sure that it uses the
above settings. If you are using a
configurable printer, use the above
guidelines when defining the settings.
4. Power up the Yap Jack Pro.
•
Plug the power supply into an AC outlet and
plug its power cable into the
DC IN port on
the rear of the device.
The device powers-up immediately. You will
hear three beeps, the lights will glow, and
the display will read
Initializing
Please Wait…
and then
Yap Jack Pro
* Ready *
.