Nellcor OxiMax N-550, Руководство по обслуживанию

Страница: 47 / 138

Audible Alarm Settings and Service Functions
N-550 37
Press the SatSeconds Alarm Limit button to select Hour and the next press of
the SatSeconds Alarm Limit button will select the Minute Second display. See
Figure 12.
Figure 12: Minute Second Display
Press the SatSeconds Alarm Limit button to select Second and the next press
of the SatSeconds Alarm Limit button enters the selected date and time into
the N-550. The N-550 sounds three beeps to indicate that the date time is set.
Menu Item 9 (Save Current Values as Power-On Defaults)
If menu item 9 is selected, the current values for alarm limits, alarm volume,
pulse beep volume, audible alarm silence duration, alarm silence behavior,
in-sensor event data type, RS-232 Nurse Call polarity, communications
protocol, data port language, and baud rate are saved as the institutional
default settings. To save new values as the current institutional default values,
press the
SatSeconds Alarm Limit button. Three tones sound to indicate that
the changes are accepted.
The following can be saved as institutional default values.
Table 3: Institutional Default Values
Parameter Range
SpO
2
high alarm limit low limit plus 1 to 100%
SpO
2
low alarm limit 80% to high limit minus 1
SatSeconds Off, 10, 25, 50, 100 seconds
Pulse rate high alarm limit low limit plus 1 to 250 bpm
Pulse rate low alarm limit 30 bpm to high limit minus 1
Alarm volume 1 to 10
Alarm silence duration 30, 60, 90, 120 seconds