manualshive.com logo in svg

NEC VERSA S, Руководство пользователя, Страница: 69 / 125

Поделиться
Скачать
NEC VERSA S Скачать руководство пользователя страница 69

    

 4-8   Using the SCU

3. 

Re-enter the password and press 

Enter

.

 When the password entry is verified, Boot Password is
enabled. No one will be able to use the system without
first entering the password.

 If you forget your password, call the NEC Technical Sup-
port number listed in Chapter 6.

SCU Password

 Set a password to access the SCU. When this option is
enabled, no one can change system setup parameters
without first entering the correct password. This option
keeps other users from setting a boot password that could
deny you access to the Versa S.

Set an SCU password as follows.

1. 

Highlight “SCU Password” and press 

Enter

.

2. 

When prompted, type a password that is from 4 to 8
characters long and press 

Enter

.

 The system asks you to re-enter the password.

3. 

Re-enter the password and press 

Enter

.

 When the password entry is verified, SCU Password is
enabled. No one will be able to use the SCU without
first entering the SCU password.

 If you forget your password, call the NEC Technical
Support number listed in Chapter 6.

First Boot

 Select the first drive to which the BIOS goes for operating
system software at system startup. When you start the sys-
tem, it looks to the drive defined here, then to the other
drives or card for operating system software.

Содержание VERSA S






























































































































Отзывы:

Нет отзывов