Using Your NEC Versa 4-9
Releasing the device
Installing a Device in the VersaBay II
Use the following steps to install a device in the VersaBay II. Specifically,
these steps show how to install the 20X CD-ROM reader that ships standard
with the system.
If you install a hard disk drive from a Versa model E, V, M, or P in the Ver-
saBay II, it becomes the master drive from which the system will boot.
Your system must be powered off or placed in suspend mode before remov-
ing or inserting devices in the VersaBay II.
NOTE
To use a hard disk drive in the VersaBay II, the drive must be
connected to the appropriate adapter. See the NEC Versa Tools
Catalog or your authorized NEC dealer for details about the Hard
Disk Drive Adapter Kit.
1.
Locate the switch labeled S (slave) and M (master) on your CD-ROM
pack.
