Using Setup 3-13
There are two ways to set your NEC Versa’s STF feature. One method is
via the Setup utility. Select Power Management from the Setup Main Menu.
Move the cursor down and highlight Suspend Mode. Press the
PgUp
key
and select STF. Save the settings and exit Setup.
The second method is to press the Fn Suspend buttons simultaneously, be-
fore you leave your NEC Versa. This function initiates STF on demand.
NOTE
When the status bar reads that there is only 3% power re-
maining in the system, the NEC Versa automatically performs a
STF.
STF Benefits
Using STF can benefit you in the following ways.
When in STF, there is minimum battery drain.
Preserves the life of your NEC Versa.
Saves you time. When you return from that urgent call or meeting, you
don’t have to perform a full reboot. You will only have to press the
Power button.
