Using Your NEC Versa 4-39
9.
Use the arrow keys to highlight the “Display BIOS Version” option on
the Main Menu. Use this option to check the currently installed BIOS
version and the version of the new replacement BIOS.
Press any key to return to the Main Menu.
10.
Highlight the “Install New BIOS” option and press
Enter.
11.
Press
Y
, then press
Enter.
After a brief pause, a message appears tell-
ing you to remove the diskette in drive A.
12.
Remove the diskette and press any key to continue. The utility updates
the BIOS. You will see a message indicating that the update is now in
progress.
Next, you will see the following message,
Your system has been updated.
To complete the flashing procedure you should
power off your system, this insures proper
application operation on the next power cycle.
13.
After reading this message, power off your computer. The next time
you power on, you will see the following message during the Power On
Self Test (POST).
CMOS Checksum Bad
RUN SETUP
Press F1 to Resume.
This message simply means the previous CMOS RAM value is differ-
ent from the current CMOS RAM value.
14.
Press the
F1
key to enter the Setup utility.
15.
Use the arrow keys to highlight “Auto Configuration with Defaults.”
16.
Press
Enter
.
17.
Press Y, then press Enter.
18.
Highlight “Save Settings and Exit” and press
Enter
.
19.
Press
Enter
.
The system reboots automatically. You now have the latest NEC Versa BIOS revision level
for your NEC Versa 6060 Series computer.
