3-2 Using Setup and Power Management
If the system detects an error during POST, it prompts you
with a double beep and a message: "Press <F1> to resume."
If you press
F1
, the system may enter setup to allow you to
correct the error. If you want to fix the error, carefully read
the error message that appears above the prompt (taking
notes if you want). If the system does not enter setup, the
standard bootup procedure resumes.
When you enter setup, the system displays the Setup Main
screen, similar to the following.
How to Use Setup
The following sections describe how to use Setup, including
these topics:
Looking at screens
Using keys
Checking and setting system parameters.
(C)1996 American Megatrends, Inc. All Rights Reserved
AMIBIOS HIFLEX SETUP UTILITY - VERSION 1.05
Advanced CMOS Setup
Power Management Setup
Peripheral Setup
Change User Password
Change Supervisor Password
Auto Configuration with Defaults
Save Settings and Exit
Exit Without Saving
Standard CMOS setup for changing time, date, hard disk type, etc.
Standard CMOS Setup
