Using Your NEC Versa 4-27
Hold the SO-DIMM at a 60-degree angle and align
the SO-DIMM connector with the socket in the sys-
tem. Push the connector into the socket.
Press down on the edge of the SO-DIMM until the
locking tabs on the sides snap into place, securing the
module.
To remove a SO-DIMM, press the locking tabs away
from the sides of the module until the module pops up.
Then, remove the SO-DIMM.
9.
Reassemble the NEC Versa components as follows.
Gently lower the palm rest back into place.
Close the LCD panel.
Turn the system over and replace the two screws.
!
CAUTION
Replace the two screws snugly, do not overtighten
or the CD-ROM tray may not open.
