1-18 Getting Started
Replacing the Battery Pack
Install the battery pack in your system as follows:
!
CAUTION
Be sure to save your data before replacing the bat-
tery pack or connecting the AC adapter. Failure to
do so can result in data loss.
1.
If your system is on, save your data, and press the Sus-
pend button or turn off the system power.
2.
Close the LCD and turn the system over.
3.
Release the battery bay cover latch, slide the battery bay
cover away from the system, and lift it off.
4.
Use your fingers to pry the battery up and lift it out of
the bay.
5.
Align the terminals on the new battery with the terminal
connector in the bay. Lower the battery into the bay.
6.
Press down on the battery to secure the terminal
connection.
7.
Replace the battery bay cover as follows:
Align the tabs on the bay cover with the grooves on
the system chassis.
Lower the cover onto the bay and slide into place.
8.
Turn the system over and press the Suspend/Resume
button to resume, or power on the system.
