Solving Problems 7-5
POST ERROR MESSAGES
ERROR MESSAGE
EXPLANATION
CMOS Time and Date Not
Set
Run Setup to set the date and time.
Diskette Boot Failure
The boot diskette in floppy drive A: is
corrupt. It cannot be used to boot the
computer. Use another boot diskette and
follow the on-screen instructions.
DMA Error
Error in the DMA controller. Contact your
NEC service representative to replace the
CMOS battery.
DMA #1 Error
Error in the first DMA channel. Contact
your NEC service representative for
service.
DMA #2 Error
Error in the second DMA channel. Contact
your NEC service representative for
service.
FDD Controller Failure
The BIOS cannot communicate with the
floppy disk drive controller. Contact your
NEC service representative to check all
appropriate connections.
HDD Controller Failure
The BIOS cannot communicate with the
hard disk drive controller. Contact your
NEC service representative to check all
appropriate connections.
INTR #1 Error
Interrupt channel 1 failed POST. Contact
your NEC service representative for
service.
INTR #2 Error
Interrupt channel 2 failed POST. Contact
your NEC service representative for
service.