NEC POWERMATE PRO2180 - SERVICE 1996, Руководство по обслуживанию

Страница: 78 / 195

2-38 Setup and Operation
Auto Start on AC Loss
This field allows you to return to the last known state of the computer in the event of a
power loss. This field can be either “Enabled” or “Disabled.” The default is “Enabled.”
Power-On COM1 Ring
If a telephony device is installed, this field enables the system to power on upon an
incoming call. This field can be either “Enabled” or “Disabled.” The default is “Disabled.”
Plug and Play Submenu
The Plug and Play Submenu lets you check or change the Configuration Mode parameters.
The Configuration Mode field is used to choose the method in which information about
how legacy ISA expansion boards (ISA boards which do not have Plug and Play
capabilities) is conveyed to the BIOS to allow the BIOS to set up PCI and ISA plug and
Play expansion boards without conflicting with the legacy ISA cards. The choices are as
follows.
n
Use ICU
−
The BIOS depends upon the information provided by run-time Plug
and Play software (Configuration Managers and ICU). When “Use ICU” is
chosen, the BIOS depends on run-time software to ensure that there are no
conflicts between ISA boards with plug and play capabilities and those without.
n
Use Setup Utility (default)
−
The BIOS depends upon the information provided
by you in the following fields to prevent conflicts between the Plug and Play and
ISA legacy boards. You should not install and use run-time Plug and Play
software such as Configuration Managers and the ISA Configuration Utility
(ICU).
Boot with PnP OS
The Boot with PnP OS field enables the system to boot with an operating system
capable of managing Plug and Play add-in cards. The choices are as follows.

None

Other

Windows 95 (default)