NEC POWERMATE PRO2180 - SERVICE 1996, Руководство по обслуживанию

Страница: 103 / 195

3-14 Option Installation
SIMM Removal
If the SIMM configuration requires the removal of a SIMM, remove the SIMM as follows.
CAUTION:
Reduce static discharge by touching
the system's metal chassis.
1.
Remove the system unit cover.
2.
Locate the SIMMs sockets on the system board (see Figure Section 3-6).
3. Press the metal clips at the outer edges of the socket away from the SIMM (see
Figure Section 3-13).
4. Push the SIMM away from the locking tabs and remove it from the socket.
Figure Section 3-13 Removing a SIMM
SIMM Installation
1. Remove the system unit cover (see “Removing the System Unit Cover”).
2. Locate the correct SIMM sockets for the desired configuration (see Figure
Section 3-6 and Table Section 3-1).
If you need to remove a currently installed SIMM, see “SIMM Removal.”
CAUTION:
Before you install a SIMM, reduce
static discharge by touching the system's metal
chassis.
3. Align the notched end of the SIMM with the socket end closest to the bottom of
the system.