NEC POWERMATE PRO2180 - SERVICE 1996, Руководство по обслуживанию

Страница: 181 / 195

System Board Settings B-9
Password Clear
Password Clear/Disabled 25-27
Password Enabled 27-29
(default)
Jumpers
21
25
29
22
26
30
21
25
29
22
26
30
Figure Appendix B-10 Password Clear Jumper
5. Replace the system unit cover (see “Replacing the System Unit Cover” in
Section 3).
6.
Connect system power cables and monitor.
7.
Power on the system. The system lets you boot your computer.
8. Power off, unplug the system and monitor, and remove the cover.
9. Remove the jumper block from pins 25-27 and replace it on pins 27-29.
10. If you removed any expansion boards, replace them (see “Expansion Board
Installation” in Section 3).
11.
Replace the system unit cover.
12. Power on the system.
13. Run Setup to set a new password (see “The Security Menu” in Section 2).