NEC NF2900-SR40E, Руководство пользователя

Страница: 135 / 168

118
Set the network property. For the network control parts #0 and #1, the same values are set.
CONT#0/CONT#1
SELECT
Select the CONT whose settings are to be viewed.
After the selection, click SELECT to determine it.
COPY1->0/COPY0->1 Set the network properties having been set to 1 or 0 are set to either
all 0s or all 1s and save the values. The IP property is also saved.
(1) IP Property
IP Address LAN IP Address
Subnetmask LAN Subnetmask
Gateway Address LAN Gateway Address
SET Determines the IP property.
(2) Manager Property
Trap Interval Time(s) Set the interval for collecting information on SNMP trap in the range
of 3 – 60 seconds. (Default: 20 sec)
iSM Valid Makes iSM effective unconditionally (ON if checked).
Make accessible from iSM without manager registration
SNMP Valid Makes SNMP effective (ON if checked).
Community Name Read permission for SNMP and community name of trap (default
value: public)
0. 0.0.0.0 Registers accessible managers (up to 8).
SNMP Check this to make accessible from SNMP manager.
TRAP Check this to report SNMP trap.
SCSI Check this to make accessible from iSM.
THRESHOLD Set the threshold of SNMP trap to be reported to registered
managers.
(Set 6 if not specified especially.)
SET Determine the Manager Property.
(3) SNMP Property
Unit Contact Contact on management (Default: NULL)
Unit Name Name of agent management destination (Default: NULL)
Run browser update after modification
Unit Location Unit installation location (Default: NULL)
Unit Info Unit management information (Default: NULL)
Unit Event Filter Threshold of event level to be registered to event table (Default=6)
SET Determine the SNMP Property.