61
Power
On
--------- Turns the projector‘s power on.
Off
--------- Turns the projector’s power off.
Note:
• While your projector is on, be sure to have the lens cap removed from the lens.
Otherwise, the lens cap may get deformed due to a heat buildup.
• In the following instances, the power to your projector cannot be turned on even if you press the POWER button:
• When the inside temperature is abnormally high. The protective function prevents power from turning on.
Wait some time (until the projector inside cools down) and then turn on the power.
• When the lamp is at the end of its life. Power will not turn on. Replace the lamp with a new one.
• When the STATUS indicator is blinking without the lamp lighting up after power-on. Your projector may be in trouble.
Check the error display on the LCD screen and contact your dealer/distributor for instructions.
• Note that the image may sometimes flicker until the lamp has stabilised (3 to 5 minutes) after power-on.
This is due to the characteristics of the lamp and is no trouble of your projector.
Picture Mute
On
--------- Turn off image projection temporarily.
Off
--------- The image will be projected again.
Note:
• When the GPIO control is in “Enable,” the PICTURE MUTE function will not work.
Shutter
Close
----- The lens shutter will operate to shut off the light for projection.
Open
------ Cancel the operation of the lens shutter.
Signal Select
Title List
------- The projector title list is displayed here.
Double-click to select the title.
Test Pattern
-- The test pattern list is displayed here.
Double-click to select the test pattern.
11. Using the PC Control Software
(Menu Descriptions & Functions)
11-1. Basic
11-1-1. Control
