33
7. Projector Adjustments (Model iS8-2K)
7-1. Projector Setup Orientation
The DLP Cinema Projector has been shipped for Desktop Front projection from our factory. To change this
default projection method, you must change the projection method using the Image Orient command con-
tained in the Configuration menu:
1. Press the
TEST
button while holding down the
CTL
button on the remote control
panel.
The Passcode input screen appears on the LC display located on the projector's side panel.
2. Enter your passcode* using the numeric character keys of the remote control.
After authentication of your passcode, the Configuration menu will become active.
* Contact your dealer for your specific passcode.
3. Use the arrow buttons
/
to select "Installation".
4. Press the
button.
5. Use the arrow buttons
/
to select "Image Orient".
6. Press the
button.
7. Choose a desired projection method ("Image Orientation").
8. Press the
ENTER
button.
An (
) will be put on the selected projection method.
7-2. Primary Lens Adjustments
Test patterns are displayed for adjustments of the screen size, focus and screen position with the primary
lens.
7-2-1. Display of Test Patterns
1. Press the MENU button on the remote control panel.
"SOURCE SELECT" appears on the projector's LC display.
2. Press the
button.
3. Select a desired test pattern (TEST PATTERN) using the
/
buttons.
4. Press the
button.
5. Press the
ENTER
button.
An (
) will be put on the selected test pattern.
