35
a
b
c
c
b
a
3
햶
Finally adjust the focus using the
FOCUS+-
buttons either of the remote control or the projec-
tor.
Note:
If you use the lens memory for adjustment of the focus, first move
the
key (Focus Down) almost to the limit and then make adjust-
ments so that you can finish the adjustment on the
(Focus Up)
side.
x-direction fixing levers
7-2-3. Adjustments of Anamorphic Lens
Here you will adjust the mounting positions (vertical, horizon-
tal and depth) of the anamorphic lens, and its tilt/pan angles
and focusing as well.
햲
Move the anamorphic lens mount (of the holder)
until it comes in front of the primary lens of the
projector. Temporarily lock the x-direction fixing
levers to fix the mount.
햳
Loosen the right and left hexagon head screws of
the anamorphic lens holder and move the anamor-
phic lens so that the clearance between this and
the primary lens is minimized. Tighten the side
hex screws.
햴
Loosen the anamorphic lens setscrew (hexagon
head screw) and turn the lens unit so that the ver-
tical and horizontal lines of the center of the im-
age projected become perpendicular and level.
(To prevent the anamorphic lens from coming off, be sure to hold
the lens while loosening the setscrew.)
