40
2
1
a
b
c
3
a
b
8-3. Installation and Adjustments of Anamorphic Lens
Mount the anamorphic lens and adjust the position, angle, and focus
of the anamorphic lens.
8-3-1. Mounting of Anamorphic Lens
햲
Fasten the anamorphic lens holder so that it is in
front of the primary lens.
햳
Loosen the hexagonal lens fastening screw of the
anamorphic lens holder, then mount the anamor-
phic lens as illustrated in the diagram temporarily
tighten the hexagonal screw so that the anamorphic
lens does not come off.
햴
Remove the rubber cover from the projector side,
then loosen the hexagonal screw and adjust the
length of the shaft making the anamorphic lens
mounting shaft come very close without having the
anamorphic lens and the primary lens come into
contact, then tighten the hexagonal screw.
