44
3. Click one of "LAN", "Serial", or "USB".
• Go to "In Case of LAN" when "LAN" is clicked.
• Go to "In Case of Serial" when "Serial" is clicked.
• Go to "In Case of USB" when "USB" is clicked.
Note
• For wireless LAN connection, use NEC optional wireless LAN card
(SWL-2100N-N*).
* Last digit of the model code varies depending on which country
you live in.
In Case of LAN
1. Click the "IP Address" or "Host Name" of the pro-
jector that is to be controlled.
• When "IP Address" has been selected, enter the IP Address
of the projector.
(Factory default: 192.168.10.10)
• When "Host Name" has been selected, enter the Host Name
of the projector.
(Factory default: iScS-Series)
• It is usually not necessary to change the port number.
(Factory default: 7142)
2. When the required items have been set, click
"OK".
In Case of Serial
1. Select the Communication Port (PC control ter-
minal) of the projector from within the pull-down
menu.
Please check the Communication Port that can be used for
communications in the section below.
2. When the Communication Port has been selected,
click "OK" .
In Case of USB
1. Select the USB Port of the projector from within
the pull-down menu.
Please check the USB Port that can be used for communica-
tions in the section below.
2. When the USB Port has been selected, click "OK".
