57
Control Signals
Use a LAN cable to connect between your projector and MMS 1000. For wireless LAN connection, you will need an
optional wireless LAN card.
R/Cr
G/Y
B/Cb
V
H/HV
R
ACTIVE
L/MONO
ACTIVE
MMS 1000
DVD-D signal cables
(supplied with the projector)
LAN cable
DLP Cinema Projector
Table of Settings
On MMS 1000
Item
I/F with Model iS8-2K
I/F with Model iS10
Connection
LAN
Wired/Wireless
Wired/Wireless
MAIN
DVI-A
DVI
SUB
DVI-B
-
Output resolution
2Kx1K(2048x1080*
1
SXGA(1280x1024)
Output timing
CinemaPass(Sync.up to 60Hz)
CinemaPass(Sync.up to 60Hz)
Output terminal
Twin
Single
Output Bit Depth
10bit
10bit
Aspect
Aspect ratio of input signals must be set.
Fixed at Full
On the Projector
Item
Model iS8-2K
Model iS10
Signal processing(Path)
Non Cinema
Cinema
Input terminal
DVI-TWIN
DVI
Source type/Packing
Twin:10bits/color, Packed
10bits/color, Packed
Aspect
'0' always
Aspect ratio must be set by PCF or SOURCE.
*
1
: Output resolution should be 2K x 1K (1920 x 1080) if the MMS 1000 is equipped with the MM-WARP option.
Note:
Use the last updates for Firmware Data on Model iS8-2K.
