38
8. Projector Adjustments (Model iS10)
8-1. Projector Setup Orientation
The factory default projection method of the projector is set to "Desktop Front". To change the projection
method, please change the projection method with the "Setup" menu (Image Orient) of the projector.
1. Press the
TEST
button while holding down the
CTL
button of the remote control.
The Passcode input screen will be displayed on the LCD screen at the front of the projector.
2. Input the service person’s installation passcode. Using the number buttons of the remote
control.
After verifying the service passcode, the "Setup" menu will become usable.
3. Press the
/
button and select "Projector Setup".
4. Press the
button.
5. Press the
/
button and select "Image Orient".
6. Press the
button.
7. Press the
/
button and select the projection method (Image Orientation).
8. Press the
ENTER
button.
The "
*
" mark will be affixed to the selected projection method.
8-2. Primary Lens Adjustment
Display the test pattern and adjust the screen size, focus and screen position with the primary lens.
8-2-1. Display of Test Patterns
1. Press the
MENU
button of the remote control.
"SOURCE SELECT" is displayed on the LCD screen at the projector side.
2. Press the
button.
3. Press the
/
button and select "TEST PATTERN".
4. Press the
button.
5. Press the
/
button and select "Cross Hatch".
