NEC EXP320J, Руководство пользователя

Страница: 93 / 504

Windows Setup and Operation 3-5
[Right pane]
The properties of the disk selected in the left pane is shown.
In the figure above, the properties of the disk inserted to the Slot 2 of the PCI module 0.
IMPORTANT:
The [RDR Utility] display is not updated automatically. Therefore, update it by clicking
[Refresh] from [Action] on the menu or pressing
F5 after performing operations to disk
such as inserting/removing a disk, specifying/removing the RDR setting.
Making disks duplex by RDR
The following describes the procedure to set duplex configuration to disks by RDR.
In this example, the disks of the Slot 2 of the PCI modules 0 and 1 are duplexed.
1.
Insert a new disk to a built-in slot.
(In this example, a disk is inserted to the Slot 2 of the PCI module 0.)
2.
From [Start], select [Control Panel] then [Administrative Tools] and start [Computer
Management]. On the tree in the left pane, click [Disk Management].
If the inserted disk is indicated as [Not Initialized] in the right pane, right-click the disk and
initialize it.
IMPORTANT:
When a disk is inserted or initialized, a popup window asking for rebooting the system may
be displayed, but there is no need to reboot it. Select [No] and close the popup window.