NEC EXP320J, Руководство пользователя

Страница: 369 / 504

Installing and Using Utilities 5-151
To merge the system
1. Verify that all upgrade processes are complete, and that you have exited any installer programs.
2. Optionally, terminate any Remote KVM or Remote Desktop sessions.
IMPORTANT:
If you terminate the Remote Desktop, “Disconnect” instead of “Logoff.” You can remain
logged on to the Upgrade Side if you want to maintain the current desktop session. After the
merge, you will be using the Upgrade Side desktop.
3. Verify that the upgrade state, as reported in the status bar, is Production Side\Split\Ready .
If the status is Busy , you must wait for the current task to complete. If it is Broken , you might
need to abort the upgrade.
4. Click Merge .
IMPORTANT:
– Your screen might flicker and you might briefly lose control of your keyboard and mouse
as the system is merged.
– Do not select [Abort] button to interrupt the Active Upgrade during the merge. The disk
may not be recognized from the OS. When the disk isn't recognized from the OS, go to [Disc
Management] then execute [Disk Rescan].
If the disk status becomes [missing] or [offline], right click the disk and select [Disk
Reactivation] to verify the disk status becomes [online].
– If you exit the remote desktop connection to the Upgrade Side, or if you exit the remote
KVM connection to the Upgrade Side, the following error message appears on the Active
Upgrade Console of the Production Side while operating the merge.
– A user must be logged into the upgrade-side console for this operation to complete
– When this error message appears, complete the merge by following the below procedure:
1. Click the Remote Desktop link and login to the Upgrade Side.
2. Select [Retry] button on the Active Upgrade Console of the Production Side and retry
the merge operation.
Depending on the complexity of your applications and the upgrade you performed, your
applications should be backed up and running in under a minute.