APPENDIX E REVISION HISTORY
User’s Manual U17446EJ3V1UD
405
(2/2)
Edition Description
Applied
to:
Modification of
13.4.2 Multiple interrupt servicing
Addition of
Caution
to
Example 1
in
Figure 13-10 Example of Multiple Interrupts
(1/2)
Addition of
Example 3
to
Figure 13-10 Example of Multiple Interrupts (2/2)
CHAPTER 13 INTERRUPT
FUNCTIONS
Modification of reset signal in
Figure 14-3 HALT Mode Release by Reset Signal
Generation
Modification of description in and addition of
Note
to
(a) Release by unmasked
interrupt request
in
(2)
of
14.2.2 STOP mode
Modification of reset signal in
Figure 14-6 STOP Mode Release by Reset Signal
Generation
CHAPTER 14 STANDBY
FUNCTION
Modification of
Figure 15-1 Block Diagram of Reset Function
CHAPTER 15 RESET
FUNCTION
Modification of
Figure 16-3 Example of Software Processing After Release of
Reset (1/2)
CHAPTER 16 POWER-ON-
CLEAR CIRCUIT
Modification of
Figure 17-1 Block Diagram of Low-Voltage Detector
Modification of INTLVI and
Note 2
in
Figure 17-5 Timing of Low-Voltage Detector
Interrupt Signal Generation
Modification of
(2)
in
<Action>
of
17.5 Cautions for Low-Voltage Detector
Modification of
Figure 17-6 Example of Software Processing After Release of
Reset (1/2)
CHAPTER 17 LOW-
VOLTAGE DETECTOR
Modification of description and configuration in
CHAPTER 18 OPTION BYTE
CHAPTER 18 OPTION
BYTE
Modification of and addition to
19.1 Features
Figure 19-2 Environment for Writing Program to Flash Memory
is divided into two
figures, in the case of FlashPro4 and in the case of PG-FPL2
Deletion of
19.7.1 Flash memory programming mode
Modification of and addition to
19.8.2 Cautions on self programming function
Addition of
<Setting conditions>
in
3. Operating conditions of WEPRERR flag
of
19.8.3 Registers used for self programming function (3)
Addition of description to
Figure 19-15 Format of Flash Programming Command
Register (FLCMD)
CHAPTER 19 FLASH
MEMORY
Complete revision of
CHAPTER 21 ELECTRICAL SPECIFICATIONS (TARGET
VALUES)
CHAPTER 21
ELECTRICAL
SPECIFICATIONS
(TARGET VALUES)
CHAPTER 25 PACKAGE
MARKING INFORMATION
Addition of
CHAPTER 25 PACKAGE MARKING INFORMATION
and
CHAPTER 26
RECOMMENDED SOLDERING CONDITIONS
CHAPTER 26
RECOMMENDED
SOLDERING CONDITIONS
Addition of included software tools to
A.1 Software Package
APPENDIX A
DEVELOPMENT TOOLS
2nd edition
Addition of
APPENDIX D LIST OF CAUTIONS
APPENDIX D LIST OF
CAUTIONS
Содержание 78K0S/KB1+
Страница 2: ...User s Manual U17446EJ3V1UD 2 MEMO ...
