manualshive.com logo in svg

NEC 78K0S/KB1+, Руководство пользователя

Продукт NEC 78K0S/KB1+ - микроконтроллер для различных интегрированных систем. У нас вы можете скачать бесплатное руководство по эксплуатации на русском языке. Загрузите его с manualshive.com. Наши пользовательские руководства помогут вам быстро освоить функции этого устройства.

Поделиться
Скачать
background image

User’s Manual  U17446EJ3V1UD 

4 

Windows and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the 
United States and/or other countries. 
PC/AT is a trademark of International Business Machines Corporation. 
HP9000 series 700 and HP-UX are trademarks of Hewlett-Packard Company. 
SPARCstation is a trademark of SPARC International, Inc. 
Solaris and SunOS are trademarks of Sun Microsystems, Inc. 
SuperFlash is a registered trademark of Silicon Storage Technology, Inc. in several countries including the 
United States and Japan. 

 

Caution:  This product uses SuperFlash

®

 technology licensed from Silicon Storage Technology, Inc. 

 

 

 

The information in this document is current as of November, 2006.  The  information is subject to 
change without notice.  For actual design-in, refer to the latest publications of NEC Electronics data 
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products.  Not 
all products and/or types are available in every country.  Please check with an NEC Electronics sales 
representative for availability and additional information.

No part of this document may be copied or reproduced in any form or by any means without the prior       
written  consent of NEC Electronics.  NEC Electronics assumes no responsibility for any errors that may 
appear in this document.
NEC  Electronics

 

does not assume any liability for infringement of patents, copyrights or other intellectual 

property rights of third parties by or arising from the use of NEC Electronics products listed in this document 
or any other liability arising from the use of such products.  No license, express, implied or otherwise, is 
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative 
purposes in semiconductor product operation and application examples. The incorporation of these 
circuits,  software and information in the design of a customer's equipment shall be done under the full 
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by 
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics  endeavors to enhance the quality, reliability and safety of NEC Electronics  products, 
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely.  To 
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC 
Electronics products, customers must incorporate sufficient safety measures in their design, such as 
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and 
"Specific".  
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application.  The recommended applications of an NEC 
Electronics product depend on its quality grade, as indicated below.  Customers must check the quality grade of 
each NEC Electronics product before using it in a particular application.
 "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio

and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.

"Special":

Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).

"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life

support systems and medical equipment for life support, etc.

The quality grade of NEC Electronics  products is "Standard" unless otherwise expressly specified in NEC 
Electronics data sheets or data books, etc.  If customers wish to use NEC Electronics products in applications 
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to 
determine NEC Electronics' willingness to support a given application.

(Note)
(1) "NEC  Electronics" as used in this statement means NEC Electronics  Corporation and also includes its 

majority-owned subsidiaries.

(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics

(as defined above).

•

•

•

•

•

•

M8E  02. 11-1

Содержание 78K0S/KB1+























































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 78K0S/KB1+

GE 400 Series Installation Instructions preview
400 Series
Бренд: GE Страницы: 2
LANGER EMV-Technik E 1 User Manual preview
E 1
Бренд: LANGER EMV-Technik Страницы: 48
Rain Bird Image Series Quick Start Manual preview
Image Series
Бренд: Rain Bird Страницы: 4
Rain Bird ESP-ME3 Quick Reference Manual preview
ESP-ME3
Бренд: Rain Bird Страницы: 2
Rain Bird ESP-Me User Manual preview
ESP-Me
Бренд: Rain Bird Страницы: 140
Raindrip WeatherSmart RSC600i Installation & Programming preview
WeatherSmart RSC600i
Бренд: Raindrip Страницы: 36
Zener SMARTSTART 6000 Networking Manual preview
SMARTSTART 6000
Бренд: Zener Страницы: 36
Zapi SMART CONSOLE Instructions preview
SMART CONSOLE
Бренд: Zapi Страницы: 5
National Instruments PXI-8150B User Manual preview
PXI-8150B
Бренд: National Instruments Страницы: 78
VMK VMK-I49plus Instruction Manual preview
VMK-I49plus
Бренд: VMK Страницы: 98
Espressif Systems ESP32-DevKitC Getting Started Manual preview
ESP32-DevKitC
Бренд: Espressif Systems Страницы: 11
Toho Electronics TTM-339 Operation Manual preview
TTM-339
Бренд: Toho Electronics Страницы: 32
Hall Research Technologies CNT-IP-264 User Manual preview
CNT-IP-264
Бренд: Hall Research Technologies Страницы: 16
YASKAWA MotionWorks IEC Example Code Manual preview
MotionWorks IEC
Бренд: YASKAWA Страницы: 21
mikroElektronika BIGdsPIC6 User Manual preview
BIGdsPIC6
Бренд: mikroElektronika Страницы: 28
Base Line BaseStation 1000 Quick Start Manual preview
BaseStation 1000
Бренд: Base Line Страницы: 11
Pego 200NDIN3RK User And Maintenance Manual preview
200NDIN3RK
Бренд: Pego Страницы: 32
DEVI DEVIreg 527 Installation Manual preview
DEVIreg 527
Бренд: DEVI Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды