The autoinformer is used to playback voice phrases via the amplifier connected to the output of the
"SPK OUT" device at the input or output of the geofence. You can use the amplifier from the Naviset HF-1
handsfree kit as a signal amplifier. The operation interface used to add and edit the routes is intuitive.
The function of the work with an autoinformer is available only in the Naviset GT20 PRO, NAVISET
GT50 versions. The operation requires inserting an SD memory card. Before using the device, format the
memory card in the FAT32 system on a personal computer. It is recommended to remove and insert a memory
card when the device is turned off.
The device can determine the direction of the input to the geofence. You can set a certain voice phrase
for each direction of the input. This function is suitable when announcing bus stops. Since in one direction the
stops are announced in direct order with the announcement of the next stop along the route, in other direction,
the bus stops must be announced in reversed order, therefore different voice phrases are used.
Creating a list of coordinates of geofence in two ways:
1. During the movement of the vehicle along the route and recording the current coordinates, the
outer and inner radius of the geofence.
2. In interactive mode, noting the points on the digital map. This method saves the time on
construction of the path and allows all the points, the radii, and vehicle movement direction to be worked out in
more details.
The device allows you to specify the direction of the input to the geofence. This function is used to
announce stops of public transport. For example, in one direction the Stop №6 is announced after the Stop №5,
in another direction the Stop №5 follows the Stop №4.
Recorded routes can be saved to a file for duplication, on other devices and thus opened from the
existing file of the rout.
The operation interface used to add and edit the routes is intuitive and does not require specialized
knowledge and training before starting work.
