7. CONTROL AND CHANGE OF SETTINGS USING CONFIGURATOR
7.1. CONFIGURATOR FUNCTIONS AND IDENTIFICATION OF THE
ELEMENTS
The configurator program is designed to perform the functions:
1.
Changes of the device configuration parameters, setting of the connected peripherals.
2.
Diagnosis and display of the current status of the device with the ability to view the current
status of all inputs, outputs and digital outputs data
3.
Calibration of the connected fuel level sensors in automatic and semi-automatic modes, with
the subsequent saving of the calibration table in a file or a built-in table in the device.
4.
Setting of the connected peripherals with regular software by providing a transparent
communication channel USB <-> PORT 1, PORT2, GSM modem, Glonass/GPS module, WiFi module.
5.
Software update
The configurator is designed to work with NAVISET GT20/GT50 transport monitoring terminals. When
the configuration device is connected, the only parameters that can be used by this device are available.
The top button panel – is the panel of additional configurator functionality, button assignment from
left to right:
1.
Switching of a user interface language
2.
Additional parameters, display of the availability of additional device options (WiFi, IRIDIUM,
433MHz radio module, etc.), operation in transparent mode with the peripherals, connected to the device via
digital interfaces: the device connects USB interface to one of the digital interfaces, which makes it possible to
set up peripherals with regular means of software settings through NAVISET devices.
3.
Calibration of the fuel senders connected to the device and printing of the calibration table
4.
Button of the program window minimization
