User’s manual NAVIGON 72 Easy | 72 Plus | 72 Plus Live | 72 Premium
- 18 -
Using the Navigation System for the First Time
9. Read the text in this window very carefully. It describes the settings
which you can make for the add-on.
10. Tap on OK.
The
W
ARN OF
S
AFETY
C
AMERAS
window opens.
11. Select the setting you want.
12. Tap on OK.
►
If you have selected the Uninstall option, you will be asked to
confirm the deinstallation of the add-on.
►
Tap on Yes.
Note:
If you deinstall
NAVIGON Safety Camera
, the add-on can be
installed again only by using the
NAVIGON Fresh
software.
The
P
RESENTATION
M
ODE
window opens.
Presentation mode is intended solely for presenting the product
when no GPS reception is possible.
When presentation mode is active, navigation is not possible.
Presentation mode is designed solely to simulate navigation to the
centre of the indicated destination.
13. Make sure that the Start in Presentation Mode checkbox is not
activated. If necessary, tap on the checkbox in order to set the
value Yes (
checkbox activated) to No (
checkbox not
activated).
14. Tap on OK.
Note:
How to deactivate presentation mode is explained in
"Troubleshooting" in section "I have accidentally activated presentation
mode" on page 126).
There then follows a series of pictures which demonstrate the basic
operations of the navigation device.
You can use the
(Next) button and the
(Back)
button to switch between the other pictures.
15. Look at all the pictures.
- or -
►
Tap on Done.
Note:
In the
N
AVIGATION
windw tap on
(More) > Show
Introduction if you want to see the introduction again later.
A window with the following message opens: