Nautel NX100, Руководство по предварительной установке

Страница: 26 / 99

NX100 Pre-installation Manual Description
Page 1-2 Issue 3.2 2017-03-31
Remote control and monitoring
The NX100 has several remote control and monitoring options that allow you to monitor critical
parameters of transmitter operation and control common functions, such as power output and exciter
selection.
• AUI - logging into the remote AUI (advanced user interface) via a LAN connection to the
transmitter.
• SNMP - configurable through the remote AUI; allows configuration of agents and traps.
• Discrete Wiring - routing multiconductor signaling cable from the transmitter to a remote
control board.
• Nautel Phone Home - configurable through the remote AUI; monitors transmitter data and
allows Nautel’s Customer Service Department to proactively support your transmitter, possi-
bly before a fault occurs.
Redundancy
The NX100 features redundancy in all key systems:
• RF power modules
• Power supplies
• Exciters
• Cooling fans
• Low voltage power supplies
Ac power
The NX100 variable power transformer can be set to use a range of input voltages and power
frequencies, as described in
Section 5, “Electrical requirements” on page 5-1 of this manual.