natus Olympic Brainz Monitor, Справочное руководство

Страница: 18 / 100

Brainz BRM3 Brain Monitor Reference Manual |
9
Introduction
Care when touching patient
Do not touch any exposed metal parts at the rear panel of the Touchscreen Monitor unit (including
connectors), while simultaneously touching a patient.
Electrical stimulator hazard
Do not use the BRM3 Brain Monitor simultaneously with electrical stimulators.
Cautions
Read all documentation
Read this document, and any other operating instructions or other documentation packed with the BRM3
Brain Monitor, carefully before operating the instrument in a clinical setting. Keep this document for
future use.
Do not autoclave
Do not autoclave any component of the BRM3 Brain Monitor, as serious and irreversible damage may
result.
Ventilation
Do not obstruct the passage of air behind or around the Touchscreen Monitor or block the ventilation
inlet holes at its rear.
Conductive parts
Do not allow the conductive parts of the electrodes and associated connectors, including the Reference
(or neutral) electrode, to contact other conductive parts, including ground, while the BRM3 Brain
Monitor is being used for an assessment.
Disconnection of cables or AC supply
Do not disconnect any of the cables connecting the BRM3 Brain Monitor’s components, operate the
power switch, or disconnect the AC supply, while the BRM3 Brain Monitor is in use. If any of these
conditions occurs accidentally, reconnect the cables (if necessary) and resume the current assessment.
See
Restoration after AC supply interruption
on page 24.
Cleaning the BRM3 Brain Monitor
Do not clean with concentrated bleach, corrosive chemicals or abrasive cleaning compounds.
Servicing the BRM3 Brain Monitor
Do not open the enclosures of the Touchscreen Monitor, DAU, or power supply unit, for any reason. If
any component is faulty, contact your healthcare institution’s service personnel or an Authorized Service
Center. See
Authorized service centers
on page 41.
Disconnect when not in use
If the equipment is not to be used for a long time, disconnect it from the AC supply outlet to avoid
damage by transient over-voltage.