natus Olympic Brainz Monitor, Справочное руководство

Страница: 34 / 100

Brainz BRM3 Brain Monitor Reference Manual |
25
Using the BRM3 Brain Monitor
Figure 11: Adjusting the Touchscreen Monitor

Push the BRM3 Brain Monitor in front of you, by holding the Roll Pole, rather than the Touchscreen
Monitor unit.
Hold the Roll Pole firmly while traversing small steps (such as the lip of an elevator cage).

When you have positioned the BRM3 Brain Monitor as required, lock the casters by depressing the
locking levers.
Adjusting the position of the Touchscreen Monitor
The height and angle of the
Touchscreen Monitor can be easily
adjusted to suit different operators and
operating positions.
To adjust the height of the Touchscreen Monitor:
1. Unlock the upper section of the pole by loosening
the height adjustment knob.
2. Move the Touchscreen Monitor up or down to the
required height.
3. Tighten the height adjustment knob to lock the roll
pole in the new position.
To adjust the angle of the Touchscreen Monitor:
1. Hold the Touchscreen Monitor firmly on the bottom.
2. Loosen the tilt adjustment lever and tilt the
Touchscreen
Monitor to the desired angle.
3. Tighten the tilt adjustment lever.
If the tilt adjustment lever is not able to move freely,
lift it up and out before adjusting it.
When the upper section of the pole is unlocked, the
Touchscreen Monitor is prevented from dropping suddenly by the pole’s pneumatic system.
Using the Accessory Basket
The Accessory Basket, attached to the BRM3 Brain Monitor’s Roll Pole, can be used to store the BRM3
Brain Monitor documentation and accessories.
The Accessory Basket attached to the BRM3 Brain Monitor’s Roll Pole is designed to carry
a load of no more than 41/2 lb (2 kg). Do not apply a load exceeding this amount. To
ensure stability, the Accessory Basket must be mounted within 32” (80 cm) of the ground.