54
All technical manuals are available in PDF format at
tech.napcosecurity.com
Napco iSecure Security System
Programming: Takeover Modules
The
TAKEOVER
screen allows you to assign each existing
wired zone to a supervised 900MHz wireless zone (up to 8
zones for each
ISEC-WL-MODULE
; up to 4
ISEC-WL-
MODULE
Takeover modules allowed for each
Go-
Anywhere Smart Hub
).
1. Go to
www.iSecureByNapco.com
and log into your iSe-
cure account.
2. In the
SYSTEM SETTINGS
screen, click
Wireless Mod-
ules
>
WL-MOD
and the
TAKEOVER
screen opens
(shown below).
The
TAKEOVER
screen assigns each existing wired zone
to the RF ID # of the supervised 900MHz wireless zone
(up to 8 zones for each
ISEC-WL-MODULE
).
In the
TAKEOVER
screen, shown below, for the
"
Takeover Module #
" added previously, program each
column, as detailed below
ISEC-WL-MODULE Wireless 8-Zone Takeover Module
NAME
The two numbers (e.g. "1-1") refer
to the number of the module (up to
4 allowed per Smart Hub) followed
by the assigned wireless zone .
RF ID
Type in the 7
digit sensor ID #
for the device
1
2
STATUS
Indicates the cur-
rent condition of
the
module,
whether active or
inactive; to re-
learn the unit.
3
SIGNAL STRENGTH
Relative intensity of the
last transmission, on a
scale of 1-10 (10 being the
strongest).
Note:
A read-
ing of 3 or less indicates
reception may be erratic;
relocate the module closer
to the Hub (or vice versa).
4