ID406, pag 1/4
TM
0.625 center feeded vertical dipole
25.5 - 30 MHz
400 CB channel & 10m ham band
50
Omnidirectional
Linear Vertical
1 to 2 dB higher than conventional 5/8
500 Watts (CW) continuous
1000 Watts (CW) short time
All metal parts are DC-grounded, the
inner conductor shows a DC-short
UHF-female, PTFE insulator & gold
plated central pin
Whip made of white fiberglass four
sections composite tube,
radiator made of copper wire and low
loss coax cable, stainless steel hardware,
anodized AW6060 aluminium,
UV stabilized thermoplastic
up to 160 Km/h
7360mm with bracket, radiator 6850mm
1950 x 100 x 130 mm
3 Kg
35-54 mm side mast with “V” bolt
l
W
l
Æ
Electrical Data
Type
Frequency Range
2.0
Impedance
Radiation
Polarization
Max Gain on the horizon
Max Power
Ligthning protection
Connector
Mechanical Data
Materials
Wind Resistance
Height (approx.)
Packaging Dimensions
Weight (approx.)
Mounting mast
@ SWR
£
Gain-Master
ä
is a 0.625
antenna for CB and 10m amateur band, completely designed
by electromagnetic simulation to achieve the maximum gain
and optimize the radiation pattern and bandwidth.
Engineered with the most advanced available technologies it
is completly manufactured in Italy with high quality materials.
The new design of the radiant element (
Patent Pending
)
works like a central feeded dipole so all RF currents on the
radiator are in-phase and the ground plane radials are not
necessary. The coaxial coil at the bottom works like RF-choke
for the optimum decoupling from mast and feeding line.
Made of telescopic fiberglass tubes, it is DC-grounded for the
best protection from static discharges.
Gain-Master
ä
is the new reference standard in its class of
antennas.
l
high tech fiberglass base station
PATENT
PENDING
Gain-Master is a registered Trade Mark of SIRIO antenne s.r.l.
ä
HI-QUALITY ANTENNAS MADE IN ITALY.
antenne
SIRIO
S
More technical information on: www.gain-master.it
