Napco iSecure Security System
All technical manuals are available in PDF format at
tech.napcosecurity.com
45
Programming: Motion Sensors
1. Go to
www.iSecureByNapco.com
and log into your iSe-
cure account.
2. Click
Sensor Configuration
.
3. In the
SENSOR CONFIGURATION
screen (shown be-
low), program the installed motion sensors as indicated
(when finished, click
Save
).
ISEC-MOTION
Wireless Passive Infrared Motion Sensor
SENSOR TYPE
Select "
Motion
Sensor
".
ENABLE REPORTING
Check to enable central
station reporting
1
2
3
5
6
SENSOR FUNCTION
Select "
Instant
" or "
Interior
". When armed "
STAY
" (usually when sleeping), and
you want the motion to ignore movement within the home, select "
Interior
". If you
want the sensor to immediately trigger an alarm when motion is detected, select
"
Instant
".
SENSOR ID
Type in the 7
digit sensor ID
# for the device
4
DESCRIPTION
Type the sensor descrip-
tion you wish to appear
on the keypad display
AREA
Default = 1. See the key-
pad Operating Guide for
the definition of "Area".
CHIME
Check to sound a chime
when motion is detected.
SIGNAL STRENGTH
Relative intensity of the last transmis-
sion, on a scale of 1-10 (10 being the
strongest).
Note:
A reading of 3 or
less indicates reception may be erratic;
relocate the sensor closer to the Hub.
