Napco iSecure Security System
All technical manuals are available in PDF format at
tech.napcosecurity.com
43
Go-Anywhere Smart Hub Icons
"ARMED" Light (Red)
Steady On: Armed
Slow Flash: Alarm
Rapid Flash: Instant
Off: Disarmed
"Smart Hub AC"
(Green)
On: AC On
Off: AC Off
"Cellular Signal
Strength" (Green)
Flashes: Smart Hub
cellular signal
strength 1-8
"STATUS" Light (Green)
On Steady: Disarmed and
all zones secured
Off: Open Zone
"Fire" (Red)
On Steady: Fire Silenced
Pulsing: Fire Alarm
"Trouble" (Yellow)
Steady: System Trouble
Acknowledged
Flashing: System Trouble
"Bypassed" (Yellow)
On: Zone(s) Bypassed
Wireless Sensor Transmissions (Green)
On: Receiver trouble due to excessive radio
noise in area. Try relocating the Smart Hub.
Otherwise, call for service
Rapid Flicker: Transmissions in progress
Flashing: 900MHZ peripheral download
Status
Off: No transmissions
"Operational Status"
(Blue)
Normal: Momentary Blink
every 10 seconds
All Other Blinks: Cellular
Communications in
progress
"IP Network Wi-Fi" (Yellow)
OFF: Network OK
Rapid Flashes: No IP connec-
tion
1 blink: No network cable de-
tected
2 blinks: No access to Internet
via network cable
3 blinks: Ethernet failed to com-
municate
4 blinks: Ethernet poll / checkin
failure
5 blinks: Wi-Fi enabled but no
Wi-Fi installed
6 blinks: No Wi-Fi access to in-
ternet
7 blinks: Wi-Fi failed to com-
municate
8 blinks: Wi-Fi poll / checkin fail
9 blinks: Wi-Fi no serial data
response
10 blinks: Wi-Fi security authen-
tication failed