NAiS FP Series, Руководство по оборудованию

Страница: 158 / 199

FP0 Hardware A.1 System Registers
A-3 Matsushita Electric Works (Europe) AG
Using FPWIN Pro
Procedure:
1. Set the mode of the FP0 control unit to PROG.
2. Project Navigator –> PLC –> System Register.
3. To change a set value, write the new value as indicated in
the system register table.
4. Go Online by clicking the Online button or selecting Online
mode under Online.
5. Download Project
Online –> Download Program Code and PLC Configuration. This
downloads the project and the system registers. To download system
registers only: Online –> PLC Configuration –> activate System Registers
box –> Download to PLC
Using NPST-GR software Ver. 4
Procedure:
1. Set the mode of the FP0 control unit to PROG.
2. Select the “1. SYSTEM REGISTER” in “PLC
CONFIGURATION” option from the NPST menu.
3. Select the function to be set in the “1. SYSTEM REGISTER”
in “PLC CONFIGURATION” screen. The value set in the
selected system register will appear.
4. To change a set value, write the new value as indicated in
the system register table.
5. Execute [Register] (f1) to write the data to the PC.
Using FPWIN GR
For more details about system register settings, see “Control FPWIN GR
Operational Guide Book.”
Using FP programmer II
Procedure:
1. Set the mode of the FP0 control unit to PROG.
2. Press the keys on the FP programmer II,
as shown on the right.
3. Specify the register number (e.g. No.20) for the parameter
to be set and read the parameter.
The value set in the selected register will be displayed.
4. To change the set value, press the <CLR (clear)> key and
write the new value as indicated in the system register
table.
A.1.3 Precautions When Setting System Registers
System register settings are effective from the time they are set. However, input, Tool
port, RS232C port, and modem connection settings become effective when the mode
ENT ACLR
OP
(–)
5 0
2 0
READ