Chapter 3 Transportation and Storage of Product
5
Transportation and Storage of Product
Chapter 3
This chapter describes the transportation and storage of this product.
Transportation
3.1.
• Refer to the weights of the reduction gears listed in Table 3-1 and transport the product in an
appropriate way.
• If the reduction gear needs to be lifted after unpacking, also refer to “4.4 Lifting of this product”.
• Do not stack the packing boxes containing the reduction gear too high.
• Avoid excessive impact or vibration of the reduction gear.
Table 3-1
Model
Weight (kg)
RS-260A
165
RS-320A
290
RS-900A
480
If the packing boxes containing the reduction gear are stacked too high during transportation, they
may collapse and fall down, causing injury or damage to the reduction gear.
Applying excessive impact or vibration to the reduction gear could cause damage to the reduction
gear.
The weight shown in Table 3-1 indicates the weight of the reduction gear only. The weight of the
packing box, motor flange, input spline, etc. is not included.
The actual weight of the reduction gear may slightly differ from that listed in the above table,
depending on the specifications.
Note
Important
