Mylex Global Array Manager, Руководство по установке и инструкция пользователя

Страница: 118 / 212

Physical Device and Logical Drive Monitoring
5-12 GAM Client User’s Guide
• Request Sense: Also referred to as 'Error Events', this records only
error activity in the form of vendor unique SCSI request sense format
for Mylex errors or actual SCSI request sense from physical device, i.e.
rebuild failed, consistency check failed, deferred write error, etc.
• Additional events that normally output through serial debugging port
but are critical for failure analysis will be logged too. For example,
power cycling, PCI bus error, abnormal SCSI bus behaviors etc.
☛
Note
The controller does not have Real Time Clock (RTC)
data, therefore, events logged by the controller before
you start Windows 2000 will display a relative time
stamp.This is a time value that is set when the
controller is powered on. See Figure 5-10.
Events logged by the controller after you start
Windows 2000 will display an absolute time stamp
(date and time). This is a time value that the controller
driver sets when Windows 2000 is started.
The following describes the button functions for the NVRAM Error Log:
• To save data for failure analysis that can be used for troubleshooting,
click the Save File button to record the NVRAM Error data for later
use.
• To clear the NVRAM Error Log, click the Clear Log button.
• When new NVRAM errors are logged, click the Refresh button.
• To update the NVRAM Error Log with the latest errors from the
controller, click the Refresh button.
• Click Close to close the Error Table.