Mylex Global Array Manager Скачать руководство пользователя

Страница: 125 / 212

Monitoring

Manual No. SA67-0049-01

5-19

The access status of each enclosure, which indicates the controller’s ability
to communicate with the enclosure. The status values are:

• OK – Access is optimal.

• Critical – Only one access path remains of the several that were

detected previously. If the last access path is lost, the controller will
take steps to protect the data.

• Lost – The enclosure is unreachable by the controller. Any failures

in the enclosure while this state exists will not be sensed by the
controller.

The speed of the fans in the enclosure. Each fan is designated with a number,
the values are:

• Absent – The fan is not installed, or has failed in an undetectable

way.

• OK – The fan is optimal. Fan speed is shown as either Stopped,

Low, or High. (Speed is not shown for SAF-TE enclosures.)

• Failed – The fan is installed, but has failed.

The status of the power supplies in the enclosure. Each power supply is
designated with a number. The status values are:

• Absent – The power supply is not installed, or has failed in an

undetectable way.

• OK – The power supply is optimal.

• Failed – The power supply is installed, but has failed.

The status of the temperature sensors in the enclosure. Each temperature
sensor is designated with a number. The status values are:

• Absent – The temperature sensor is not installed, or has failed in an

undetectable way.

• OK – The temperature sensor is optimal. Two additional items are

displayed with this state: Celsius Temperature (range for SES is -19º
to +235º; range for SAF-TE is -10º to +245º); Over Temperature
Warning (OT).

• Failed – The temperature sensor is installed, but has failed.

The status of the alarms in the enclosure. Each alarm is designated with a
number, the status values are:

Содержание Global Array Manager





















































































































































































































Результаты поиска

Содержание Global Array Manager

Отзывы:

Похожие инструкции для Global Array Manager

Бренды по названию

Популярные бренды

Mylex Global Array Manager, Руководство по установке и инструкция пользователя

Результаты поиска

Содержание Global Array Manager

Отзывы:

Похожие инструкции для Global Array Manager

Бренды по названию

Популярные бренды