MUTOH VJ-2638 Скачать руководство пользователя страница 4

Страница: 4 / 334

VJ-2638/1638/1638W OPERATION MANUAL

(4)

Trademark Mentioned in this Manual

•

MUTOH, ValueJet, VJ-2638, VJ-1638, VJ-1638W, MH-RTL are registered trademarks or product
names of MUTOH INDUSTRIES LTD.

•

Windows XP, Windows Vista, Windows 7 are registered trademarks or product names of Microsoft
Corporation.

•

Other company and product names may be registered trademarks or product names.

NOTE

• No part of this product or publication may be reproduced, copied, or transmitted in any form or by

any means, except for personal use, without the permission of MUTOH INDUSTRIES LTD.

• The product and the contents of this publication may be changed without prior notification.

• MUTOH INDUSTRIES LTD. has made the best efforts to keep this publication free from error, but

if you find any uncertainties or misprints, please call us or the shop where you bought this
equipment.

• MUTOH INDUSTRIES LTD. shall not be liable for any damages or troubles resulting from the use

of this equipment or this manual.

Содержание VJ-2638















































































































































































































































































































































Результаты поиска

Содержание VJ-2638

Отзывы:

Бренды по названию

Популярные бренды

MUTOH VJ-2638, Руководство по эксплуатации

Результаты поиска

Содержание VJ-2638

Отзывы:

Бренды по названию

Популярные бренды