MUTOH VJ-2638 Скачать руководство пользователя страница 181

Страница: 181 / 334

VJ-2638/1638/1638W OPERATION MANUAL

Handling the printer

4.4 Operating from Operation panel

155

4.4.5.2

Settings that can be changed or confirmed while printing

NOTE

• When you change a setting during operation, be sure to select "Backup" to save the setting that you

changed.
If the printer returns to Normal without "Backup" being selected, the changed setting is not saved.

• Check the following before using the Job status items

• The values displayed in the Job status items are rough indications.They do not guarantee the

strict accuracy.

• If the length information is not included in the print data, "0" is displayed for all items.

• You can check the "remaining print" and "remaining time" in the way described in

4.4.8

Normal Display while Printing

• To check the information about the printed data, refer to the following.

Setup item

Setting

Description

Reference

Temperature
(VJ-2638/1638)

Pre

Checks the current temperature of Pre-heater.

—

Platen

Checks the current temperature of Platen
heater.

Dryer

Checks the current temperature of Dryer.

Pre-heater
(VJ-2638/1638)

Off / 30ºC to 50ºC

Changes the temperature of Pre-heater.

5.1.1.1.4 Pre-heater

menu (VJ-2638/1638)

Platen heater
(VJ-2638/1638)

Off / 30ºC to 50ºC

Changes the temperature of Platen heater.

5.1.1.1.5 Platen

Heater menu (VJ-2638/
1638)

Dryer
(VJ-2638/1638 )

Off / 30ºC to 50ºC

Changes the temperature of Dryer.

5.1.1.1.6 Dryer

menu (VJ-2638/1638)

PF Adjust

-5.00% to 0.00% to
5.00%

Change the feed adjustment value.

5.1.1.1.3 Media

feed compensation

Backup

• [Enter] key: Save the changed setting.

—

Job Statsus

ToDo Length

• Check the whole length of the data (media

feed direction) currently being printed.

—

Done

• Check the printed length of the data

currently being printed.

Remain

• For the data currently being printed, check

the length of the data that has not been
printed.

Remain Time

• Displays the time remaining for printing.

—

• [Cancel] key: The printer returns to

Normal.

—

Содержание VJ-2638















































































































































































































































































































































Результаты поиска

Содержание VJ-2638

Отзывы:

Бренды по названию

Популярные бренды

MUTOH VJ-2638, Руководство по эксплуатации

Результаты поиска

Содержание VJ-2638

Отзывы:

Бренды по названию

Популярные бренды