manualshive.com logo in svg

MUTOH VJ-2638, Руководство по эксплуатации

Поделиться
Скачать
MUTOH VJ-2638 Скачать руководство пользователя страница 235

VJ-2638/1638/1638W OPERATION MANUAL

Panel setup menu

5.3  Cleaning menu

209

5.3

Cleaning menu

Performs head cleaning.

TIP

Head cleaning can be operated when the printer is Normal.
Refer to the following for operation procedures.

6.2.3 Head cleaning

NOTE

• If the head height is set to High, "Change Head Gap Low" is displayed on Operation panel.

Set the head height to Low.

4.2.5.3 When setting the head height to Low

Setup item

Description

Short

Discharges smaller amount of ink compared to "Normal".
• [Enter] key:

"Cleaning **%" is displayed on Operation panel and head cleaning starts.
Progress on the Head cleaning is displayed in % on Operation panel.

Normal

Select this mode normally.
• [Enter] key:

"Cleaning **%" is displayed on Operation panel and head cleaning starts.
Progress on the Head cleaning is displayed in % on Operation panel.

Long

Discharges larger amount of ink compare to "Normal".
Used when Print head does not improve by normal head cleaning.
• [Enter] key:

"Cleaning **%" is displayed on Operation panel and head cleaning starts.
Progress on the Head cleaning is displayed in % on Operation panel.

Little Charge

Refills a small amount of ink.
Charge a small amount of ink when printing is not stable after ink replenishment.

3.3 Filling ink

• [Enter] key:

"Ink Refill **%" is displayed on Operation panel and ink replenishment starts.
Progress on the ink replenishment is displayed in % on Operation panel.

Initial ink charge

Performs the intial ink charge.
Even when using the printer whose ink has already been filled, when you use High-capacity 
ink pack adapter for the first time, perform this initial ink charge.

3.3.5 When using High-capacity ink pack adapter for the first time on the 

printer whose ink is filled

• [Enter] key:

"Ink Refill **%" is displayed on Operation panel and ink replenishment starts.
Progress on the ink replenishment is displayed in % on Operation panel.

—

• [Cancel] key: shifts to the previous menu.

5 Panel setup menu

Содержание VJ-2638















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды