MUTOH VJ-2638 Скачать руководство пользователя страница 241

Страница: 241 / 334

VJ-2638/1638/1638W OPERATION MANUAL

Panel setup menu

5.6 Sleep Mode menu

215

5.6.1

Timer Setting menu

Set the head cleaning interval of this printer for Sleep Mode.
When more than the set time has passed, Print head is cleaned automatically.

NOTE

• During Sleep Mode, even if the set amount of time has passed, print-head cleaning is not performed

under the following circumstances.

• Front cover is open.

• Maintenance cover is open.

• Media loading lever is raised.

• The head height is set to High.

• Waste fluid tank is full.

• Ink cartridge is empty.

• Ink cartridge has been removed.

• An ink cartridge other than genuine Ink cartridges is inserted into Cartridge slot, etc.

When the printer returns to a normal state, head cleaning is restarted, and Sleep Mode continues.

7.2 Error messages

• If one of the above conditions occurs during head cleaning, cleaning is stopped.

When the printer returns to a normal state, head cleaning is restarted.

7.2 Error messages

Setup item

Setting

Description

Set Timer

1 hour

When the set time has elapsed, head cleaning starts.

2 hours

3 hours

4 hours

5 hours

<6 hours>

9 hours

12 hours

18 hours

24 hours

—

• [Cancel] key: shifts to the previous menu.

5.6 Sleep Mode menu

Содержание VJ-2638















































































































































































































































































































































Результаты поиска

Содержание VJ-2638

Отзывы:

Бренды по названию

Популярные бренды

MUTOH VJ-2638, Руководство по эксплуатации

Результаты поиска

Содержание VJ-2638

Отзывы:

Бренды по названию

Популярные бренды