MUTOH Rockhopper II 2H, Руководство по обслуживанию

Страница: 62 / 319

Rockhopper II series printers – Maintenance Manual
63 AP-74065, Rev. 1.2, 27/09/04
Step 13 :
Stick the isolation tape onto the heater strips.
1 = plot platform 2 = fixer heater strip
3 = isolation tape
Step 14 :
Reinstall all parts in the opposite order of the removal procedure.
Notes :
¾ During reinstallation of the plate, make sure there are no cables stuck.
4.3.2.4. Replacing the heater (Heater A) on a Rockhopper II 4H printer
Before replacing the post fixer, make sure to have following items:
¾ 50” model : Heater A 50
¾ 64” model : Heater A 64
¾ 87” model : Heater A 87
¾ 2 x press plate
¾
Silicone glue
To replace the heater on a Rockhopper II 4H printer, please follow the instructions mentioned below.
Step 1 :
Remove side cover L.
Step 2 :
Remove side cover R.
Step 3 :
Remove the front cover.
Step 4 :
Remove the Y rail cover.
Step 5 :
Remove the rear paper guide.
Step 6 :
Remove the heater strip.
Step 7 :
Degrease the plate.
Notes :
¾ Make sure the plate is cleaned properly. Dust, glue and other parts must be
removed.