MUTOH Rockhopper II 2H, Руководство по обслуживанию

Страница: 274 / 319

Rockhopper II series printers – Maintenance Manual
275 AP-74065, Rev. 1.2, 27/09/04
(2) The number of
times the print
head was used
reached the
maximum
allowable times. • Replace the print
head assembly.
• Initialize the head
unit.
→
Replacing the
print head
assembly and
head tape power
cable.
→
Counter
initialization
menu.
(3) If initialization
does not take
effect when the
head unit is
initialized, the
Mainboard
assembly may be
damaged.
• Replace the
Mainboard
assembly. →
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly
(1) Check the
connections of
connectors. • Redo the
connections of the
following
connectors.
• Mainboard : J102
• power source
board (small)
assembly : CN51 –
CN52
(2) The
HDD_MOTHER
board assembly
may be damaged. • Replace the ink
tube.
• Initializing CR
motor history.
(3) Hard disk may
be damaged. • Replace the hard
disks.
11 Hard disk
status connect
error
There is a problem
in the hard disk
connections.
(4) The Mainboard
assembly may be
damaged. • Replace the
Mainboard
assembly.
→
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
→
Replacing the
power source
board assembly.
(1) The
PCI_LINUX board
assembly may be
damaged. • Replace the
PCI_LINUX board
assembly. 12 Network
initialize error
There is a problem
in the network
board.
(2) The Mainboard
assembly may be
damaged. • Replace the
Mainboard
assembly.
→
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
(1) Check if the
waste bottle has
been installed. • Install the waste
bottle correctly. - 13 Waste ink tank
sts. No The waste tank is
not installed.
(2) Check the
operation of the
waste box sensor
assembly via
“Sensor/Waste
Bin” of the self-
diagnostic
function. • Replace the
waste box sensor
assembly. -