MUTOH Rockhopper II 2H, Руководство по обслуживанию

Страница: 59 / 319

Rockhopper II series printers – Maintenance Manual
60 AP-74065, Rev. 1.2, 27/09/04
Step 10 :
Reinstall all parts in the opposite order of the removal procedure.
Notes :
¾ During reinstallation of the plate, make sure there are no cables stuck.
4.3.2.2. Replacing the post fixer (Heater C) on a Rockhopper II 4H printer
Before replacing the heater, make sure to have following items:
¾ 50” model : Post Fixer C 50
¾ 64” model : Post Fixer C 64
¾ 87” model : Post Fixer C 87
¾ 1 x sensor insul. Patch
To replace the post fixer on a Rockhopper II 4H printer, please follow the instructions mentioned below.
Step 1 :
Remove side cover L.
Step 2 :
Remove side cover R.
Step 3 :
Remove the front cover.
Step 4 :
Remove the Y rail cover.
Step 5 :
Remove the front paper guide.
Step 6 :
Remove the post fixer strip.
Step 7 :
Degrease the plate.
Notes :
¾ Make sure the plate is cleaned properly. Dust, glue and other parts must be
removed.
Step 8 :
Stick the post fixer strip onto the plate.
Notes :
¾ Make sure that the strips connect properly.
¾ Stick it as close as possible to the assembly holes. Make sure it does not touch the
assembly holes.
Notes :
¾ Please make sure that there are no air bubbles under the heater strip. Air bubbles
below the heater strip could cause overheating of the heater strip.