Muratec F-525 Скачать руководство пользователя страница 74

Страница: 74 / 383

2-21

Errors may occur in the following reasons:

Error message

Detail

The " " " mark were not entered correctly prior to

the conversion.

The numbers of the double quotation marks were

odd-number. The marks should be even-num-

bered in CSV files.

The fax number contains a syntax error.

Only the numeric characters and dialing charac-

ters can be registered in the fax number field.
Available characters: 1 to 9, *, #, -, /, D, F, N, P, S,

T, X

The fax number exceeds 40 digits.

---

The e-mail address exceeds 50 characters.

---

The address book cannot store this many num-

bers.

The NGP cannot store more than 300 contacts. If

the OfficeBridge option is installed, the numbers

may differ according to the CF capacity. (1000,

1500 or 2000)

The fax number and e-mail address were not en-

tered.

The fax number or the e-mail address is a manda-

tory field the address book’s data.

The address book number contains a syntax error. The address book numbers should be specified

between 1 and 300.

The specified address book number exceeds the

limit.

The specified address book number has already

been registered.

It is not possible to register in the same address
book number.

The information on an imported vCard(s) exceeds

512 characters.

In vCard file, one record should be within 512
characters.

The CSV/vCard file selected either cannot be
recognized or is empty.

---

Export details

The following two file types are available as exported address book:
•vCard
• CSV

Содержание F-525
































































































































































































































































































































































































Результаты поиска

Содержание F-525

Отзывы:

Бренды по названию

Популярные бренды

Muratec F-525, Руководство по полевой инженерии

Результаты поиска

Содержание F-525

Отзывы:

Бренды по названию

Популярные бренды