manualshive.com logo in svg

Muratec F-525, Руководство по полевой инженерии, Страница: 230 / 383

Поделиться
Скачать
Muratec F-525 Скачать руководство пользователя страница 230

3-146

16. To send the service report to the Muratec customer service, press [Enter].

  You may also edit the location and press [Enter].

17. To send the service report to another location, press [Mail Address 2]. Otherwise, skip to step 21.

18. Enter the e-mail address of the location using the numeric keypad.

19. Press [Enter] to save the setting.

20. To enter one more location, press [Mail Address 3], and repeat steps 18 and 19.

21. Go to the next display and press [Report Format].

22. Select the report format between [One Page] and a [Detail].

23. Press [Enter] to save the setting.

24. Select [Period].

25. Select between [Interval] and [Monthly] and press [Enter].

To send the report at some definite interval, select [Interval].
To send the report on a designated time once a month, select [Monthly].
•  When you select [Interval], proceed to step 26-1.
•  When you select [Monthly], proceed to step 26-2.

Содержание F-525
































































































































































































































































































































































































Отзывы:

Нет отзывов